Microswitch MP40 (IP40 / screw)

Microswitch MP90 (IP67 / screw)

Microswitch MP110 (IP67+plug-in)

Microswitch MP200 (IP67/68 cable moulded)

Basic snap action microswitch, for high breaking capacity.

Available with screw lug, solder terminals, AMP terminals, withmoulded cable or plug-in connectors. Protection class IP40,IP67 or even IP68

• 400 VAC / 10A - 250 VAC / 15A

• -40°C to +130°C

• DIN 41 635, E - Form

• Dim. 49 x 21 x 17 mm

Microswitch MP300

Miniature microswitch sealed snap action with small differential travel and large actuator range

• 250 VAC / 6A

• -40°C to +170°C

• IP67 / IP68

• DIN 41 635, A - Form

• Dim. 31 x 29 x 10.3 mm

Microswitch MP400

Customisable Subminiature microswitch, with multiple cable or free wires connections.

• 250 VAC / 5A

• -40°C à +105°C

• IP67

• Dim. 20 x 16 x 6.5 mm

Microswitch MP500

Subminiature microswitch of standardized small dimensions. With multiple cable / lead options, PCB or solder terminals

• 250 VAC / 5A

• -40°C to +105°C

• IP67

• DIN 41 635, B - Form

• Dim. 20 x 16 x 6.5 mm

Limit and security switchMP700

Limit switch. Position switches with positive openningoperation overmoulded cables

• AC -15 3A      DC - 13 0.27A

• Thermal current 6A

• -40°C to +130°C

• IP67

• DIN43695, EN 50047

• Dim. 50 x 30 x 16 mm

Limit switch MP800

Limit and safety switch
Metal and double insulated case

• AC -15 3A      DC - 13 0.27A

• Thermal current 10A

• -25°C to +70°C

• IP65/66

• EN 50041 / 50047

Emergency stop button MP900

• AC-15 240VAC 6A / DC-13 250VDC 0.27A

• EN 60947-5-1 / UL 508 / CSA 22-2

• -25°C à 70°C

• IP65

RA Series T1 Right Angle / 3mm

• Customized to your specifications without tooling charges
    • Variable LED spacing, minimum .180” (4.57 mm)
    • Maximum bar length 6.0” (152.4 mm)
• Available with 2 to 33 T1 LEDs in one convenient assembly
• Bar provides consistent alignment for multiple LED mounting
• Wave solderable and chemically cleanable
• Housing and bar material UL 94V-O rated

RA Series T1 Right Angle Bar 0.122" High LED Centerline / 3mm

• Customized to your specifications without tooling charges
    • Variable LED spacing, minimum .180” (4.57 mm)
    • Maximum bar length 6.0” (152.4 mm)
• Available with 2 to 33 T1 LEDs in one convenient assembly
• Bar provides consistent alignment for multiple LED mounting
• Wave solderable and chemically cleanable
• Housing and bar material UL 94V-O rated

RA Series T1 Right Angle Bar 0.150" High LED Centerline / 3.8mm

• Customized to your specifications without tooling charges
    • Variable LED spacing, minimum .180” (4.57 mm)
    • Maximum bar length 6.0” (152.4 mm)
• Available with 2 to 33 T1 LEDs in one convenient assembly
• Bar provides consistent alignment for multiple LED mounting
• Wave solderable and chemically cleanable
• Housing and bar material UL 94V-O rated

DRA/DRS Series T1 Right Angle Bar  / 3mm

• Customized to your specifications without tooling charges
    • Variable LED spacing .170” (4.32mm)
    • Maximum bar length 6.0” (152.4 mm)
• Available with 2 to 33 bilevel T1 LEDs in one assembly
• Bar provides consistent alignment for multiple LED mounting
• Wave solderable and chemically cleanable
• Housing and bar material UL 94V-O rated
• Shrouded option for backlighting
• Bilevel design saves PC board space

TRA/TRS Series T1 Right Angle Bar / 3mm

• Customized to your specifications without tooling charges
    • Variable LED spacing .170” (4.32mm)
    • Maximum bar length 6.0” (152.4 mm)
• Available with 2 to 33 tri-level T1 LEDs in one assembly
• Bar provides consistent alignment for multiple LED mounting
• Wave solderable and chemically cleanable
• Housing and bar material UL 94V-O rated
• Shrouded option for backlighting
• Tri-level design saves PC board space

RA Series T1 ¾ Right Angle Bar / 5mm

• Customized to your specifications without tooling charges
    • Variable LED spacing, minimum,280” (7.1 mm)
    • Maximum bar length 6.0” (152.4 mm)
• Available with 2 to 22 T1 3/4 LEDs in one convenient assembly
• Bar provides consistent alignment for multiple LED mounting
• Wave solderable and chemically cleanable
• Housing and bar material UL 94V-O rated

BN/BT Series T1 ¾  Right Angle Bar / 5mm

• Customized to your specifications without tooling charges
    • Variable LED spacing, mimimum .245” (6.22 mm)
    • Maximum bar length 6.0” (152.4 mm)
• Available with 2 to 24 T1 3/4 LEDs in one convenient assembly
• Bar provides consistent alignment for multiple LED mounting
• Available in two LED configurations - direct cross to industry standard 5mm right angle LED
• Wave solderable and chemically cleanable
• Housing and bar material UL 94V-0 rated

VBI/VBD Series Vertical Bar

• Mounts series of LEDs in single-in-line or dual-in-line footprint
• Customized to your specifications without tooling charges
    • Center LED spacing in .050” increments or built to your specifications
    • Minimum spacing .100” (2.54 mm)
    • Maximum bar length 3.0” ( 76.2 mm)
    • Color combinations available at no extra cost
    • Assembly height built to your design
• Any size or type LED can be used- VBI bar holds 3 leaded LEDs
• Bar provides consistent alignment and one-step PC Board mounting
• Bottom standoff facilitates board washing
• Wave solderable and chemically cleanable – bar material UL 94V-O rated
• Polarity identification on bar
• Custom offset and right angle bends available on VBI bar

L30/L31 Series T1 / 3mm

• Front mounting snap-in LED- no mounting hardware required
• Optional resistor in lead
• Custom wire options

L40/L41 Series T1 / 3mm

• Rear mounting friction fit- no mounting hardware require
• Custom housing lengths and lead lengths available
• Optional internal resistor – can be customized for AC applications
• Sealed against moisture and dust - IP66 sealing available
• Fits panel thickness .031” (0.79mm), .060” (1.52 mm)
• .125”(3.18 mm), .187” (4.75 mm), and .220” (5.59 mm)
• Wide selection of wire sizes and types – including Mil Spec
MIL-W-22759/33 wire
• Ganged LED assembly with connector built to your spec

L50/L51 Series T1 ¾ / 5mm

• Front mounting, snap-in LED - no mounting hardware required
• Optional resistor in lead
• Fits panel thicknesses from .031” ( .787 mm) to .062” (1.574 mm)
• Can be customized for AC applications
• Custom wire and connector options

L60/L61 Series T1 ¾ / 5mm

• Rear mounting, friction fit – no mounting hardware required
• Custom housing lengths and lead lengths available
• Optional internal resistor – can be customized for AC applications
• Sealed against moisture and dust – IP66 sealing available
• Available for panel thickness .062” (1.58 mm), .125” (3.18 mm), and
.187” (4.75 mm)
• Wide selection of wire sizes and types – including Mil Spec MILW-
22759/33 wire
• Ganged LED assembly with connector built to your spec

4000/3000 Series T1 / 3mm

• One piece body and lens construction – available in red, green, blue,
amber and clear butyrate plastic
• Front mounting ribbed body “snaps into panel”– no mounting hardware
required
• Available in smooth body for thinner panels – mounts with tinnerman nut
• Optional internal resistor- can be customized for AC applications
• Wide selection of wire sizes and types – including Mil Spec
MIL-W-22759/33 wire
• Sealed against moisture and dust to meet IP66

4400/7400 Series / 5mm

• Special part marking available – polarity identification is standard
• Optional internal resistor – can be customized for AC applications
• Choice of body finishes and termination style
• Front mounts with barrel fastener
• Jewelled transparent stovepipe lens provides wide viewing angle

100/600 Series T1 ¾ / 5mm

• Simplified one piece lens and body-mounts with tinnerman nut
• Sealed against moisture and dust to IP66
• Optional internal resistor – can be customized for AC applications
• Part marking and connector options
• Custom wire options – including MilSpec MIL-W-22759/33 wire

CS/BS Series T1 Reflector 3mm

•Sealed against moisture and dust – watertight gasket option and IP66 sealing available
• Optional internal resistor for 5V-60VDC – resistor on lead for 3 leaded bicolor LED
• Custom assemblies for 5V-60VAC and 120VAC
• Mil Spec MIL-W22759/33 wire and connector options

CD Series T1 Reflector 3mm

• Sealed against moisture and dust – watertight gasket option and IP66 sealing available
• Optional internal resistor for 5V-60VDC – resistor on lead for 3 leaded bicolor LED
• Custom assemblies for 5V-60VAC and 120VAC
• Mil Spec MIL-W22759/33 wire and connector options

CR/BR Series T1 ¾ Reflector 5mm

• Sealed against moisture and dust – gasket option and IP66 sealing available
• Optional internal resistor for 5V-60VDC, 5V-60VAC and 120VAC option
• Mil Spec MIL-W22759/33 wire and connector options

CC Series T1 ¾ Reflector 5mm

• Sealed against moisture and dust – gasket option and IP66 sealing available
• Optional internal resistor for 5V-60VDC, 5V-60VAC and 120VAC option available
• Mil Spec MIL-W22759/33 wire and connector options

CRM Series T1 ¾  Rear mount 5mm

• Rugged watertight construction – sealed to IP66
• Rear mounts in .315” (8.00 mm) D-shaped hole
• Optional internal resistor for for 5V-60VDC, 5V-60VAC and 120VAC option
• Mil Spec MIL-W22759/33 wire and connector options
• Internally potted-suitable for high vibration applications

400/300 Series Incandescent / Neon Panel mount indicator

• One piece body and lens construction – available in red, green, amber,clear, blue, yellow and white transparent or translucent butyrate plastic
• Front mounting ribbed body “snaps into panel” – no mounting hardware required
• Available in smooth body for thinner panels – mounts with tinnerman nut
• Sealed against moisture and dust to meet IP66
• Part marking available

100/600 Series Incandescent / Neon panel mount indicator

• Simplified one piece lens and body- mounts with tinnerman nut or nickel steel bezel
• Sealed against moisture and dust to meet IP66
• Custom part marking and wire options

700 Series Incandescent / Neon Panel mount Cartridge indicator

• Available in two lens styles – flush and stovepipe
• Choice of body finishes and termination style
• Front mounts with barrel fastener
• Special part marking available

Led 120VAC/240VAC

Wilbrecht LEDCO, Inc. introduces bipolar LEDs in its range of panel mount LED’s in varied housing styles for front or rear panel mounting in response to international demand.

Led Night Vision

Wilbrecht LEDCO, Inc. introduces new Night Vision Imaging System (NVIS) compatible LEDs for its front mount CR/BR and rear mount CRM series panel LED indicators.

LED Design Kit

Wilbrecht LEDCO, inc has assembled more than 50 of the most popular and latest Panel Mount LEDs into a single Design Kit exclusively for engineer

Series WA and WB

These commercial grade metal foil resistors provide extreme stability for A/D circuits.

Series WQ and WT

These close tolerance metal foil resistors are approved for MIL-PRF-55182/RNC90 (R Level)

Series WN

The WN Series is qualified to the NASA S-311-P-813 specification.